Features:
- iFlight CineBee 75HD is the latest BNF creation of minimum weight at a spectacular performance, traditional but versatile and upgradeable design
- Micro drone carry a 1080p (up to 60fps) micro cam stack and recording JELLOFREE footage flying through smallest gaps and spots.If slow cruising or fast racing, the cam angle goes from 0-55 degrees with motors from 2S-3S
- Whoop drone use a combination of carbon, plastic, and TPU to have a rigid bottom plate that doesn’t oscillate, with still crash resistant abilities and integrated prop guards giving the whole frame strength
- The CineBee 75HD puts the SD card device on the bottom of the drone and is equipped with a special protective cover to protect it, can easy insert or eject it
- The stack is soft-mounted, the cam is soft-mounted, the motors run smooth – keep your props in a good condition, and you won’t have to worry about jello
Specification:
- Total Dimensions: 110x93x30mm
- Frame Wheelbase: 75mm
- Build Weight: 66.2g
- SucceX Micro 16×16 Tower 2-4S
- iFlight 1103 motors (1.5mm shaft)
- Caddx.us Turtle v2 HD FPV cam
- Gemfan 1635 40mm 3/4 blade OR HQ 1.6×1.6×4
- iFlight Prop Guards 40mm
- SucceX Mirco F4 Flight Tower System 16x16mm
SucceX Mirco F4 Flight Tower System 16x16mm
- STM32F411
- Input voltage 2-4S LIPO
- Gyro: MPU6000
- 2x UART ports
- 4x motor outputs
- OSD inbuilt
- No Blackbox FLASH
- BEC 5V 2A cont.
- Size: 21mmx21mm
- Mounting holes: 16×16
- Weight: 2.5g
- BF target : MATEKF411
- SucceX Mirco 12A Brushless ESC
- Firmware: BlheliS
- Input voltage : 2-4S LIPO
- Continuous current: 12A
- MCU: BB21F16G
- BEC : None
- ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
- Size: 23mmx21mm
- Mounting hole 16x16mm
- Weight: 2.7g
- SucceX Mirco VTX
- Power : PIT/25/100/200mW
- Antenna interface : IPEX (UFL)
- Telemetry: IRC Tramp
- Size: 17mmx27mm
- Mounting holes: 16x16mm
- Weight: 1.6g
Motor kV Variants: - We offer several motor setups to fit your desired performance, equipment or just preference.
- (2S), (3S) will be available.
SD card insert and ejection: - The HD cam PCB is conveniently placed under the frame, protected by a cover
- To insert or eject the SD card, please push in the SD card and gently slide beside the security plastic guard.
VTX control implementation: - VTX can be conveniently set up in your OSD.
Propeller recommendation: - Gemfan for general use, durable prop, crash resistant!
- HQ for video recording, JELLOFREE, better throttle management, NOT crash resistant!
Receivers available currently: - Frsky XM+
- Flysky FS-A8S
- Futaba FT4X
- SDMX RM601X
Optional: - Frsky XM
- Frsky R-XSR
- Flysky IA8X
Configuration: - iFlight CineBee 75HD frame x1set ,iFlight SucceX Mirco F4 flight controller x1pc ,iFlight SucceX Mirco 12A 4 in 1 ESC x1pc ,iFlight SucceX Mirco VTX transmitter x1pc
iFlight 1103 11000kv motor x4pcs ,Caddx.us Turtle 2 black camerax1pc ,Gemfan 40mm 3blade 1635-3 1.5mmx4pairs ,iFlight black 10*100mm battery strapx2pcs
iFlight 3D TPUx1set ,iFlight white Flight control adapter x1pc ,iFlight white bottom plate cover x1pc ,iFlight white 40mm propeller guard x1set/4pcs
antenna protector tube(crystal)x2pcs ,antenna protector tube cap(black)x2pcs ,XT30 connector wirex1pcs ,ipex(UFL)connector 5.8G VTX antenna(8CM)x1pc - Note:
Every iFlight CineBee 75HD needs time to debug and then ship again when it leaves the factory. Please understand
Package include:
- 1 x CineBee 75HD Racing Drone
Reviews
There are no reviews yet.